Skip to main content

World’s Most Powerful Outboard Motors Rely on AMSOIL

World’s Most Powerful Outboard Motors Rely on AMSOIL

Seven Marine, maker of the world’s most powerful outboard motors, has a saying: We move the people who move the world. The Germantown, Wis. company designs, builds and sells outboard motors that produce up to an astonishing 627 hp and power some of the fastest and most impressive watercraft in the world.

All that power places tremendous stress on their sophisticated motors, which is why they turned to AMSOIL synthetic lubricants as their factory- and service-fill lubricants after having previously used Mobil* products. We sat down with Eric Davis, Seven Marine Vice President, to get the story.

AMSOIL Magazine: What makes Seven Marine unlike any other manufacturer of marine motors?

Eric Davis: We build the most powerful outboards available on the market today. We use a completely different technological approach than any other outboard manufacturer by using the small-block supercharged V-8 out of the Cadillac* CTS V and applying that in its normal horizontal configuration under the cowl. And that really makes Seven Marine unique because all other outboard motors are vertically oriented. That means we can use the performance, quality and emissions advancements that are central to automotive engines and apply that to outboard motors for the first time. In addition, we pair the engine to a ZF* marine wet-disc-clutch transmission. We’re the only outboard that uses a transmission. Because of that, our motors don’t shift in the lower unit.

AMSOIL Magazine: What performance advantages does that design provide?

Davis: It allows us to optimize the lower unit with a twin-pinion, race-inspired design that’s smaller in diameter. That benefits us in high-speed-cruise fuel economy and top-speed capability. A twin-pinion also gives you a tremendous amount of durability.

So, when you use a horizontal crankshaft engine, go with a wet-disc-clutch transmission and finish with a twin-pinion lower unit, you really get an outboard that’s built completely different, which is how we’re able to deliver the amount of power and torque to the propeller that sets us apart from everyone else.

AMSOIL Magazine: Your most powerful motor produces 627 hp. On what type of watercraft are people using your outboards?

Davis: The vast majority of our applications are multi-engine, and the trend lately has been more quads than anything [using four engines simultaneously]. We address the market that’s called the ‘super consoles,’ so we’re talking about 40-plus-foot, centerconsole, off-shore boats. Four engines can be done using a boat as short as 43 feet and as long as 61 feet.

AMSOIL Magazine: Who’s buying your outboards?

Davis: By the time you find out what they’ve done or what they do, they’ve touched your life in some way, shape or form. We use as a corporate tag line, ‘The Power to Move Those Who Move the World,’ and that really came from the fact that our customers are exactly those people, whether it’s the northern hemisphere’s largest onion farmer or the family that owns the third-largest grain distributor in the world – all kinds of people like that. They have truly amazing stories.

AMSOIL Magazine: How do they use your outboard motors?

Davis: It varies a lot. In general, they use them for transportation. They’re moving great distances, and what makes the applications unique for Seven Marine is that they’re trying to traverse those distances at high-speed cruise. They use the applications for everything from island-hopping to poker runs to deep-sea fishing. We have customers in the Gulf of Mexico who are running 150 miles to fish the rigs, so they’re cruising three hours at 50 mph to get out there and fish. We have people in Alaska 150 miles from civilization. Generally speaking, they’re covering great distances at pretty good clips.

AMSOIL Magazine: Why did you choose AMSOIL synthetic lubricants for your engines and transmissions?

Davis: When you’re trying to deliver the most luxurious experience for the customer and deliver the most performance at this level of power, you really have to have the best of everything to make sure it works properly. And you have to be confident that you have the best lubricants to ensure you’ve got the ultimate in durability. AMSOIL, on the engine and transmission side, has been the best products we can find. That allows us to be confident that when we do a factory-fill and recommended servicefill with AMSOIL, that you’re going to get that same factory performance day-in and day-out.

AMSOIL Magazine: What did your own test results tell you about AMSOIL products?

Davis: When we started doing oil sampling from dyno testing and looking at the performance of the oil and its degradation, the AMSOIL results were superior than what we were using before [Mobil products]. We’re endeavoring to build the absolute best world-class products we can and innovate in the marine industry, so we prefer to have an oil that we feel is as innovative and technologically advanced as the engines that it’s going into, and that leaves us with AMSOIL

In Sioux Falls review our marine 10W-30 and 10W-40 4-stroke oil for the big blocks, the new Mercury 25W-20 and several 2-stroke oils for injection units both OEM and our famous HP Injector formula and the 45 year old 100:1 outboard pre-mix.

And our best seller – the highly stable and water resistant Marine Gear Lube 75W-90.

The 3000 Mile Oil Drain Fails To Address The Real Issue

The 3000 Miles Oil Change Interval Doesn’t Address Oil Quality

When people say to me they change their oil at 3000 so not to take any chances that dirt could be causing damage or the oil could be getting “bad”, I say to them, why not change every 50 miles then?? I’m sure the oil is still good but as you said, why take a chance?

Let’s look at the top reasons for engine failure which relate to the oil.

#1 is lack of lubrication. Nothing to do with dirt but a poor quality non-synthetic even low quality synthetic made from Group III base stocks (There are over 80 different quality levels for a Group III oil thus lower prices – this does not fit the scientific definition of synthetic) can and will leave deposits OR lose viscosity early on both causing lack of lubrication.
#2 – Overheating – Often the damage done after a engine overheats is caused by the heat being too intense for the oil to hold its properties. An AMSOIL product would have prevented this especially in air cooled (V-Twin bikes or marine) and in the new trend of turbocharged engines. The coming LSPI issue will demand the oil be at least a 100% synthetic quality. It’s designed for temperatures beyond these issues.
So changing oil every day will not prevent the above. Any overheating event or the list of reasons which cause a lack of lubrication cannot be addressed by the 3000 mile oil change. Only by the quality of the oil. AMSOIL also adds performance and for the difference in price per quart is less than the cost of a cup of today’s coffee so the solution for protecting your investment is here!! And has been for 45 years.

Quality Oil Filtration is a Must but still only part of the issue

I couldn’t find the study as I was writing this but Federal Mogul published research that “dirt” in oil was actually a minor part of failure while things relating to lubricant quality were. Acids or loss of TBN was a much more severe issue. Corrosion and storage was a far greater contributor to reduction in engine efficiency and ultimately failure.

Mild quality oil filters solve the dirt issue for up to 10,000 miles but you still need an oil which can fight contaminants caused by fuel or advanced wear over the years (such as starting with a used vehicle which you don’t know the history of). AMSOIL addresses the contaminants with their advanced additive packages and are willing to cover that with a guarantee.

How do you know?

Note while that AMSOIL does back their oil for longer intervals, this is clearly stated for engines which are in normal operating condition and have not been modified. For modified engines, neglected ones or those with a good number of miles over 100,000 they do list severe service categories or one can always get our KIT-02 oil analysis kit and go from there.

Just use better oil and find out what you are missing!

AMSOIL use will tilt the scales of a nations fleet replacement statistics. Imagine that. Just from changing brands of oil.

The 3000 mile oil change interval excuse is much like arguing one brand of cigarettes is more healthy than another.
Use AMSOIL and unlock the full potential of your drive train!! Find out what others already know – AMSOIL is all about performance!
Ches Cain – AMSOIL Direct Jobber