Heavy Duty Metal Protector
This new upgrade has turned out to be a hit in our store. Holds on better than Fluid Film and has the rubberized quality of 3M Rubberized spray. Still excellent as a heavy lubricant for linkages where grease is messy and a light WD-40 type product is just not enough..
Every garage in the salted street states needs a can!
Convenient Spray-On Metal Surface Protectant
AMSOIL Heavy-Duty Metal Protector (AMH) has been reformulated to provide improved performance as a corrosion inhibitor.
MPHD is an easy-to-use, spray-on product that effectively protects metal surfaces that are exposed to the damaging effects of salt, moisture or chemical corrosion. It is ideal for steel, iron, aluminum, brass, copper and other metal surfaces exposed to water, dirt or road salt.
- Protects metal from the effects of water, salt and humidity
- Excellent long-term protection against corrosion
- Displaces water and prolongs equipment life
- Leaves a dry, long-lasting, wax-like film
- Resists dirt
- Sprays into hard-to-reach places
Quick-Drying, Long-Lasting Formula
The new Heavy-Duty Metal Protector formula provides a dry time of two hours, and a total cure is reached at 12 hours. Depending on the application, how it’s used and the operating environment, protection can last up to several years.
What About Lubrication?
MPHD still provides some lubricating properties, but its primary focus is corrosion protection. We know many customers use MPHD as a chain lube. We recommend converting to AMSOIL Chain Lube.
Automotive and trailer undercoat, spare tire carriers, battery terminals, tailgate hinges, handheld tools, snow plows, mower decks and blades, snowblowers, skid-steer attachments, farm machinery, fork lifts, metal gates/fences and much more.
With the improved performance of the formula, pricing has increased. Even with the price adjustment, both wholesale and suggested retail prices are very competitive in the corrosion inhibitor market.
It’s Tested To Prevent Rust!
We tested MPHD’s corrosion-prevention properties on both aluminum and steel. The three aluminum pieces in the upper left were treated with MPHD on their lower halves, while the three aluminum pieces in the upper right were untreated. Following treatment, the pieces were placed in a 5 percent saltwater bath for one hour, removed and allowed to dry for 23 hours. This process was repeated for two weeks. As seen in the pictures, the portions treated with MPHD show no signs of corrosion.
Prior Formula While Supplies Last (Price reduced in store)
AMSOIL Heavy Duty Metal Protector helps protect metal surfaces that require a heavy-duty lubricant or are exposed to the damaging effects of salt, moisture or chemical corrosion. Ideal for hinges, wire ropes and springs, nuts and bolts, motorcycle or bicycle chains, and for undercoating wheelwells and other metal surfaces exposed to water, dirt or road salt.
- Helps protect against rust & corrosion, even in salt water
- Displaces water
- Stops squeaks
- Lubricates metal surfaces
- Leaves a dry, long-lasting, (wax-like) film
- Lubricant does not attract dust
- Does not sling off
- Sprays into hard-to-reach places
- Ideal for chains & other heavy-use items
Spray product on area to be treated. For best results, do not wipe off. Film carrier will evaporate, leaving Heavy Duty Metal Protector on treated surface.
AMSOIL Heavy Duty Metal Protector is available in 16-oz. spray cans.Check Price or Buy
AMSOIL PRODUCT WARRANTY
AMSOIL products are backed by a Limited Liability Warranty. For complete information visit AMSOIL Warranty Information.
Buy in the Sioux Falls AMSOIL store at 4610 W. 12th St. or use this Online link to the Amsoil sale page if you are outside of the area.