Skip to main content

9 Tips for Safe Trailer Towing

9 Tips for Safe Trailer Towing

Friends of mine in Minneapolis were driving on Highway 35, talking about this and that, minding their own business, when – Wham! A trailer carrying a boat slammed into their car.

The trailer had disconnected from the tow vehicle and darted across the median in a high-velocity trajectory that could have killed my friends had it not been a glancing blow. Though the shattering glass put them in the hospital, it could have been much worse. It was an accident that shouldn’t have happened.

Safety tips for towing a trailer

One morning while driving to work I was thinking about this very topic and, right in front of me, I saw another towing accident. Someone towing his race car down Mesaba Ave. here in Duluth, Minn., caused a traffic jam when the stock car left the trailer and swept wildly into the midst of rush-hour traffic.

Again, it was an accident that shouldn’t have happened.

Whether it’s a boat, a house trailer or your trash to the dump, safe towing requires attention to detail.

Here are nine key points for safe towing and longer vehicle life

1) Know your weight limits

Make sure your trailer and whatever you’re hauling fall within the towing or hauling capacities of your vehicle. Check the owner’s manual to find the trailer types that your vehicle can haul and the maximum load weight it can pull. Use the right trailer hitch and make sure it is hitched correctly.

2) Distribute weight evenly

If your trailer fishtails (sways while accelerating), back off the gas and see if it stops. If it continues when you accelerate again, check to see how the weight is distributed on the trailer. It may not be distributed evenly from side to side, or else it’s too far back to place sufficient load on the hitch ball.

Try to carry 5-10 percent of the trailer load on the hitch. Redistribute the load as necessary before continuing.

3) Ensure the trailer lights work

Connect the brake and signal lights. Double check to make sure the trailer’s brakes, turn signals and tail lights are synchronized with the tow vehicle.

4) Properly inflate the tires

People I once knew suffered 17 tire blowouts while pulling a trailer from California to South Texas. (True!) You’d think they would have figured out they had too much weight in the trailer. In addition to staying within weight limits for your rig, be sure the tires are in good condition and properly inflated.

5) Your vehicle will handle differently

When towing, you’re operating a vehicle combination that’s longer and heavier than normal. Be sure to adjust your driving practices accordingly.

Backing up is tricky, but it’s a skill you can learn. Until you’re experienced, have someone direct you from outside in those tight spots or places where you have limited visibility.

Avoid sudden turns. I know – sounds obvious. But I was once the first person to an accident where someone decided at the last minute to take the exit instead of going straight. The car ended up upside down because the trailer had other ideas.

When it comes to towing accidents, don’t say, “It can’t happen to me.” Say instead, “It must not happen to me.”

6) Buckle your seat belt

In case your tow vehicle ends up upside down.

7) Stopping requires more distance

It’s a simple matter of physics. When towing, you have more momentum than you would without a trailer. Remember that stopping requires more time and distance. Avoid tailgating and pay attention to what’s happening a little farther down the road than you normally would.

8) Keep your head on a swivel

Maybe you forgot to fasten a chain, secure the hitch or tie down your payload properly. If you’re in a hurry to get home after a long trip, things like that can happen. Once you’re on the road, frequently check your mirrors to make sure everything looks good back there. I know a boat owner whose yacht fell sideways on the highway halfway between Canada and Duluth, which is the middle of nowhere for those who’ve never been there. Something wasn’t fastened properly. Bummer.

9) Upgrade your transmission protection

Towing places enormous stress on a transmission. In fact, because of the intense heat, towing is probably the number-one killer of transmissions.

For this reason, the “towing package” on many trucks includes a transmission-oil cooler. It also helps to use a high-end synthetic lubricant. Synthetics reduce friction and provide better resistance to high heat, helping the tranny run cooler, shift confidently and last longer.

Shameless plug time: AMSOIL Signature Series Synthetic ATF handles heat so well, you can confidently double your vehicle manufacturer’s severe-service drain interval in passenger cars and light trucks.

Check out our Las Vegas Taxi Cab field study for all the technical details if you’re so inclined.

Stay safe out there and visit our Sioux Falls AMSOIL Store at 4610 W. 12th St. (Just west of I29 about 1-block)  605-274-2580

Remember This When Trying to Find Which Transmission Fluid You Need

Remember This When Trying to Find Which Transmission Fluid You Need

Take a look at just a few of the dozens of automatic transmission fluid (ATF) specifications on the market:

  • ATF+4
  • Mercon V
  • Mercon LV
  • Dexron VI
  • ATF DW-1
  • ATF T-IV
  • SP-IV
  • Toyota ATF-WS
  • Honda DW (ZF
  • Diamond SP-IV

You’ve likely heard the term analysis paralysis.

That’s what many people feel when they scan the shelves at Advance Auto in search of transmission fluid. They just want a quart or two of ATF to top-off their vehicle, but instead they must decipher a series of hieroglyphics or face the specter of ruining their tranny by choosing the wrong fluid.

There’s a sure-fire way to avoid this hassle.

But first, check out this survey by the Petroleum Quality Institute of America (PQIA), which confirmed what many already know about buying ATF – the specifications listed on ATF labels can be confusing and misleading.

One reason is the sheer number of ATF specifications on the market. Interpreting the made-up words (“Mercon” and “Dexron” sound like diabetes medication or the latest U.S. Defense Department initiative, after all) leaves you shaking your head and vowing to service your transmission next spring.

It wasn’t always like this. At one time, Ford Mercon- and GM Dexron-type ATFs dominated the market and reduced your choices to a manageable few. Today, demand for those fluids has slipped below 50 percent and is declining as original equipment manufacturers (OEMs) continue to introduce their own, proprietary specs.

What is an ATF spec?

Simply put, it’s a set of performance standards. It’s not an actual fluid, meaning you don’t go to NAPA in search of Mercon or Dexron transmission fluid. You go in search of a fluid that meets the Mercon or Dexron specification. In an attempt to make it easy for you, many ATF manufacturers print those specs in giant letters on the label. Judging by the survey, though, it’s not working. This means the fluid was subjected to – and passed – a series of performance tests stipulated by the authors of the Mercon or Dexron specifications.

Today, it’s normal for most OEMs to author their own performance specifications rather than recommend using a fluid that meets a different OEM’s specifications, for example Mercon or Dexron. You can blame it on technological advancements that have made vehicles tougher on transmission fluid than cars of yesteryear. An automaker that introduces its latest 500-hp land rocket wants to be sure you’re using a transmission fluid capable of standing up to the intense heat and stress churning through all those gears.

It may also have something to do with money. Brand XYZ would rather you buy Brand XYZ transmission fluid than another company’s fluid, which helps explain why some OEM-branded fluids are so expensive.

That brings us back to analysis paralysis.

How can we cut through the confusion and make transmission fluid selection easy? And how do we do it while meeting the performance demands of most modern automatic transmissions?

One transmission fluid to rule them all

That’s a bit of hyperbole in honor of my favorite trilogy about hobbits and orcs, but it’s not far off.

We formulated AMSOIL Signature Series Synthetic Automatic Transmission Fluid and OE Synthetic Automatic Transmission Fluid to take the guesswork out of ATF selection. Both fluids are recommended for most of the common ATF specs on the market.

Mercon V? Check.

Dexron III? Check.

ATF+4? We cover that, too.

We take convenience a step further with our online Product Guide, which tells you which fluid your vehicle needs.

LOOK UP TRANSMISSION FLUID FO MY VEHICLE

If you tow, haul or engage in other types of severe service, use Signature Series Synthetic ATF. If you stick to the highway and mostly run to work and home, OE Synthetic ATF is your best bet.

So, when it comes to finding the right transmission fluid, forget about the hieroglyphics and just remember these six letters: AMSOIL.

video
play-sharp-fill