To borrow a famous slogan, just do it. You don’t need to take any special steps before you switch to synthetic motor oil from conventional oil.

There is still some confusion about changing to a different type of oil in vehicles, particularly older models that have accumulated many miles. A small group of ill-informed individuals in garages and on blogs still cling to old beliefs that synthetic motor oil causes roller followers to “slip or skid,” or that switching to synthetic motor oil causes issues in older engines, particularly oil leaks.

Facts have since replaced these outdated ideas about synthetics causing engine problems.

AMSOIL Formulations Are The Exception To The Rule

More people than ever are making the switch to synthetic oil because properly formulated synthetics offer benefits well beyond what conventional and synthetic-blend products provide. Many new passenger car and light truck vehicles come factory filled with synthetic lubricants – not just high-performance sports cars.

AMSOIL for decades have addresses those old rumors regarding the negative effects of switching to synthetics, most of which were never true.

There are a Couple Ways to Switch to Synthetic Motor Oil for the First Time.

• Jump right in and simply change the oil. Take your vehicle to your mechanic or the nearest quick lube and ask for synthetic motor oil. Or, dust off your drain pan and do it yourself. You don’t have to do anything special to your engine first, and the synthetic oil isn’t going to cause problems in your vehicle that weren’t already there, such as leaking seals.
• Flush the engine first. Though not required, an engine flush more immediately removes sludge and debris accumulated over time. It will also stop or significantly reduce oil consumption. Many say it improved mileage due to ring sludge.