Skip to main content

Signature Series Battles Sludge

Written by Charleen

Signature Series Battles Sludge

The health of your engine depends on motor oil circulating quickly and efficiently through the system, but sticking components and obstructed passages inhibit motor oil from lubricating, cooling and protecting your engine. Engine “sludge” occurs when oxidized oil and contaminants build up on engine surfaces. It can restrict the flow of oil to the point of engine failure and costly repairs.

Warehouse note: The so called “fully synthetics” which are mostly group III’s or a combination of a majority group II and a fraction III ($3.50 synthetics)  to a majority III and a fraction of IV ($8.50 synthetics) – all based on price and what the stock holders allow to be used for a desired profit.. Note that all of these WILL leave deposits in the form of sludge. Turbocharged engines must avoid these brands which include the silver one shaped like a shampoo bottle. 

Sludge: Where It Starts & How It Ends

  • The valve cover and oil pan are generally the first areas sludge appears.
  • The oil pick-up tube screen is often the next spot it accumulates, impeding oil flow through the system.
  • What begins as a thin film of lacquer or varnish deposits eventually bakes into an expensive mess.

 

The Sequence VG Engine Test

Engine failures due to sludge are often caused by a clogged pick-up tube screen – the motor is effectively starved of oil. The Sequence VG Engine Test determines how well an oil resists sludge formation and keeps the lubricant flowing freely throughout the system. The test is required for API SN PLUS – a specification recommended by most domestic vehicle manufacturers.

TEST PARAMETERS

 

Engine Ford* 4.6L V-8
Duration 216 hours
Measures Sludge and varnish deposits, piston ring sticking, clogged oil pump screens and roller pin wear
Simulates Taxi, delivery or commuter vehicle service
Requirement Oil pick-up tube screen limited to 10 percent blockage

 

The Results

Signature Series Synthetic Motor Oil was subjected to the Sequence VG to measure its ability to prevent sludge. As expected, Signature Series produced an oil pick-up tube screen virtually free from sludge (see image). Our unique combination of detergents and high-quality base oils control oxidation and sludge to keep engines clean and efficient.

 

Signature Series has 50 percent more detergents1 to help keep oil passages clean and promote oil circulation. It provides 90% better protection against sludge2.

Warehouse Note: Thankfully our efforts here in Sioux Falls have made the Signature Series our top seller and on the minds of many who want their investment to remain like new beyond 250,000 miles. People are realizing that it’s not all about change frequency as a non “true synthetic” can cause damage in just 10 miles in GDI engines due to LSPI.. Not to mention why I adopted AMSOIL back in the day – the added power and performance!!

1 vs. AMSOIL OE Motor Oil
2 Based on independent testing of AMSOIL Signature Series 5W-30 in the ASTM D6593 engine test for oil screen plugging as required for the API SN PLUS specification.
*All trademarked names and images are the property of their respective owners and may be registered marks in some countries. No affiliation or endorsement claim, express or implied, is made by their use. All products advertised here are developed by AMSOIL for use in the applications shown.

Knowledge Base, , , , , , , , , ,

Help Revive a Lawn Mower (and other equipment) that Runs Rough

Written by Charleen

Help Revive a Lawn Mower (and other equipment) that Runs Rough

John Baker|

Judging someone’s character can be boiled down to this key question: do they love going to the dump?

An affirmative answer indicates a visionary – one who sees a fashionably distressed dining set where others see a worn out table and chairs. One who sees the south wall of their new chicken coop where others see dusty old windows. One who sees his new (free) rolling shop stool where others see a ratty office chair.

Why drop $50 on a shop stool when you can get a sweet unit like this free at the dump?

So, while I salivate at adding a lawnmower, snowblower or other piece of equipment from the dump to my family fleet, I also burn with shame toward my fellow man for discarding something that might have been easily repaired.

There has to be a better way

One of the biggest reasons people junk their lawnmower, string trimmer, chainsaw or other equipment is because it starts hard and runs rough. A dirty carburetor is often to blame.

Over time, oxygen deteriorates the gasoline in the carb, leading to the formation of varnish and other deposits that stick the float, block the screens and plug the tiny fuel passages. The result? Fuel that doesn’t flow properly and an arm nearly ripped from its socket from fruitlessly yanking the starter cord.

Engine deposits are another problem

The combustion chamber grows intensely hot during operation. The heat breaks down motor oil, creating carbon that can lodge in the ring lands and cause the piston rings to stick. Stuck rings reduce engine compression, which makes starting more difficult and reduces engine power.

Gasoline byproducts can form deposits on the piston crown, which can lead to pre-ignition. That’s when a super-heated chunk of carbon ignites the fuel/air mixture before the spark plug fires, causing a shock wave in the cylinder that can lead to piston damage.

In two-stroke engines, deposits can block the exhaust port or spark arrestor screen, choking off airflow and leading to rough-running. If bad enough, the engine will quit running altogether.

String trimmer exhaust port plugged with carbon deposits, causing it to run poorly.

An effective way to prevent hard-starting, rough-running equipment is to treat gas with gasoline stabilizer prior to storage and to periodically clean the carburetor and combustion chamber with a good fuel additive. Otherwise, you’ll find yourself at the dump paying to dispose of your lawnmower, snowblower or other equipment while people like me lie in wait, rubbing our hands together with glee.

If your engine and carburetor are already dirty and causing grief, clean them with AMSOIL Power Foam. It’s a potent cleaning agent that…

  • Cleans deposits from ethanol and degraded fuel
  • Removes gum and varnish
  • Maximizes horsepower
  • Restores startability
  • Helps improve fuel economy
  • Reduces pollution

It will not damage seals, gaskets, rubber or plastic materials commonly used in gasoline engines.

I’ve tried it a few times on my lawn and garden equipment, and it’s pretty simple to use. Just run the engine to normal operating temperature, remove the air filter and spray Power Foam into the intake as fast as possible without stalling the engine. You may have to rev the engine to facilitate the process. Make sure you’re in a well-ventilated area because an impressive volume of smoke will emit from the exhaust.

Then, shut off the engine and let it sit for 10-15 minutes.

While you’re waiting, Power Foam‘s potent formula attacks and loosens the built-up carbon and varnish, helping free stuck rings, clean the valves and piston crown, and remove varnish from the carburetor. If the engine is especially dirty, you may want to repeat the process.

Replace the air filter, start the engine and pat yourself on the back for helping prevent the addition of one more perfectly usable piece of equipment to the local dump.

It may be unfortunate for scavengers like me, but it’s great for your wallet.

And here’s another Sioux Falls secrete for you lawn care customers!! A frequent weedeater problem easy to repair.

video
play-sharp-fill
Maintenance, , , , , , , ,