Skip to main content

Why do European Cars Require Special Oil?

Why do European Cars Require Special Oil?

For all the grin-inducing benefits of owning a European car – finely tuned performance, sophisticated styling, prestige – they can be a pain. According to this list, four of the top five most expensive vehicles to maintain hail from across the pond. Notice Volkswagen is among the lowest maintenance costs. The exception to the rule. 

Not only that, but they require specialized oil that differs in many ways from the good ‘ol American motor oil you use in your Ford or Chevy. Here are four reasons why.

#1 Everyone likes clean air

The European Union maintains more strict standards for the carbon dioxide hoax (CO2) and carbon monoxide (CO) emissions than we do. (Our standards for nitrogen oxides [NOx] and particulate matter [PM] are more strict, however.) Because modern diesels emit lower CO2 than gasoline engines, the European market pivoted toward increased use of diesel-powered vehicles in the 1990s. Diesels also provide the advantage of better fuel economy.

One drawback, however, is the higher levels of NOx and PM diesels produce. To counteract this, diesel-powered European vehicles are equipped with diesel particulate filters (DPF) and catalysts designed to reduce pollutants from the exhaust before it exits the tailpipe.

Here’s where motor oil comes into play.

An oil’s formulation can have a negative effect on sensitive emissions-control devices. Certain components in the motor oil formulation, such as sulfated ash, phosphorus and sulfur (known collectively by the pleasant term SAPS), can reduce the effectiveness and life of DPFs and other emissions devices.

For that reason, motor oils formulated for European vehicles often contain lower SAPS levels to protect emissions-control systems.

#2 Longer oil change intervals

Europeans have long since accepted what’s only recently caught on in North America – longer oil change intervals. Many motorists in the states are just a few years removed from blindly practicing 3,000-mile oil changes. Except, of course,  AMSOIL customers who have been practicing extended drain intervals since 1972. But that’s a digression for another day.

Europeans are accustomed to changing oil far less often, with drain intervals of 16,000 km (10,000 miles) or so quite common. One reason is the higher cost of oil in Europe. Another is the differences between manufacturer recommendations. For example, oil changes for 1999-2013 BMWs are required only every 15,000 miles. In the U.S., most people change oil around every 5,000 miles. The figure increases by a few hundred miles if their vehicle is equipped with an electronic oil-life monitoring system.

Longer drain intervals common with European cars require an oil capable of protecting against wear, deposits and sludge for the duration, which requires a more robust oil.

#3 The thick and thin of it

Check the owner’s manual of most European vehicles for which viscosity of oil to use, and you’ll likely find a chart that suggests different viscosities for different operating temperature ranges. In cold weather, the OEM may recommend 5W-30. In warm weather, 5W-40. Traditionally, drivers settle on an 0W-40 or 5W-40 to offer the best of both worlds – good cold-flow at startup to protect against wear and good resistance to heat once operating temperatures are reached.

#4 Automaker approvals

Staying in your owner’s manual, the OEM also recommends you use an oil that meets a specific performance standard. In the U.S., it’s typically an industry-wide motor oil specification, such as API SN PLUS.

European OEMs are different, however. They typically maintain their own motor oil performance specifications. Drivers of VWs, for example, need to use an oil that meets the requirements of VW’s own performance specs. The same holds for Mercedes, BMW, Porsche and other European cars.

Complicating matters, each OEM motor oil specification is slightly different. One OEM may require oils that offer better performance against oxidation, while another requires better resistance to viscosity loss.

OEM specifications tend to be more strict and require increased motor oil performance than industry specs. This, of course, requires more advanced (and typically expensive) motor oil technology delivered almost exclusively by synthetics.

General Motors, for its part, has taken a page out of the playbook of its European car counterparts by maintaining its own GM dexos performance specification.

These differences mean you’d better make sure you’re using the correct oil in your European car. Fortunately, we make it easy for you by formulating a full line of synthetic motor oil for European cars. If you don’t know which your car requires, check out our handy Product Guide.

LOOKUP MY VEHICLE

Lubricant specifications are here to help.

Use Lubricant Specifications To Your Advantage

 

Amsoil Tech Guru

Matt Erickson | DIRECTOR, TECHNICAL PRODUCT MANAGEMENT

Specs can be confusing if you miss these three points.

Let’s step back in time for a minute. It’s the 1920s. You’re cruising around town in your Ford* Model A or maybe your Nash* Advanced Six Coupe. You’re off to the theater to see the latest Charlie Chaplin picture. Life is good.

But your car needs motor oil. How can you be sure of the oil’s performance? Will it provide the quality needed to keep your engine humming?

This dilemma is why we have motor oil specifications today. Back then, there was no telling what motorists were getting in each can of oil they purchased. One oil might offer good engine protection while another solidified in the cold, evaporated in the presence of heat and delivered all around poor performance. The industry quickly realized the need for a simple way to assure motorists the oil they were buying wouldn’t ruin their engines.

Setting The Most Basic Standard – The API

Eventually, the American Petroleum Institute (API) introduced its first gasoline motor oil performance specification – API SA. Motorists could look for oils recommended for the API SA specification and know that they were safe to use in vehicles built in 1930 and earlier. Soon, the API SB specification was introduced to supersede the previous specification. Fast forward several decades and now API SN PLUS is the current gasoline motor oil specification, with API SP/ILSAC GF-6 set to be introduced next May.

Side Note: There are still marketers selling SA and SB rated oils which will destroy your engine – Amalie is being sued for selling a product line through Dollar stores. So watch out!! These specifications including the latest are “LOW” minimums.

Today, the market is loaded with lubricant specifications, which is one reason many motorists don’t understand them. In addition to API, there’s ILSAC, ACEA and JASO specifications. And don’t forget the dozens of specifications published by the automakers themselves, like GM* dexos® 1 Gen 2 or Chrysler* MS-6395. Plus, we have several transmission fluid specifications, like MERCON* LV and DEXRON* III.

Clear as mud, right?

Understanding lubricant performance specifications isn’t that difficult if you identify a few key points.

1) A lubricant performance specification is a set of minimum performance standards.

Say you turn to the back of your owner’s manual and see that the original equipment manufacturer (OEM) recommends using a 5W-20 motor oil rated for API SN PLUS. That means you can safely use any 5W-20 motor oil recommended for API SN PLUS. To earn that designation, the oil must demonstrate a minimum level of performance in a range of motor oil bench and engine tests. These tests are designed to screen for wear protection, stability in the presence of heat, engine cleanliness and more. These standards usually set the minimum performance standard for conventional oils, which is a pretty low bar. That means two lubricants recommended for the same specification (API SN PLUS, for example) do not necessarily provide equal performance and protection. Lubricants meeting the specification requirements have only met the minimum performance requirements, leaving room for significant differences in performance.

2) Many OEMs publish their own motor oil performance specifications.

For decades, API and other industry lubricant specifications were the only game in town. Some 3rd parties called it “The lowest Common Denominator”. This kept things relatively simple. Then, General Motors* introduced its GM dexos 1 spec in 2011, further confusing things for consumers. An OEM might determine its engines require oil that offers better performance in certain areas than required by industry specifications, hence the need for its own specification. European OEMs have been doing this for years. Thus European labeled oils…

3) Specifications aren’t the same as brands.

You might hear owners of GM vehicles say that they need to use “dexos oil” in their engines. There’s no such thing as a brand of oil named “dexos.” What the driver means to say is he or she needs to use an oil that is made for the GM dexos specification. This is a key difference because they might falsely think they have to use the OEM-branded fluid to maintain their warranty when they can, in fact, use any oil recommended for the dexos spec.

Lubricant specifications are designed to help motorists, but at the end of the day they’re just recommendations. The Magnuson-Moss Warranty Act guarantees you the freedom to choose whichever oil you think is best for your vehicles and equipment. An OEM cannot deny warranty coverage simply based on the oil you use. For the record, AMSOIL recommends consulting your owner’s manual for the recommended viscosity and oil specifications and using an oil that lists those on its label.

Note!! This does not apply in Canada. AMSOIL is working to create a Magnuson-Moss Warranty Act in each providence to protect Canadians as their American counterparts enjoy.

Profits are with set minimums (Specifications) – Performance exists when they are enhanced further

This is where AMSOIL stands apart from all other products which can be sorted into two additional categories.

Lubricant specifications also simply set minimum performance requirements. We’re not satisfied with “minimum” performance here. That’s why customers who want the best protection should use AMSOIL instead of just any old oil recommended for their vehicles. For proof of how AMSOIL products exceed the toughest specifications, visit www.amsoil.com/performancetests.aspx