Skip to main content

Prepare Your Vehicle for Winter

Written by Charleen

Prepare Your Vehicle for Winter

Chris Sharon|

Originally posted Nov. 11, 2016

With the worst of winter right around the corner, now is a good time to get your vehicle prepared for the worst. Being based in northern Wisconsin, we at AMSOIL talk a lot about how synthetic lubricants make life a little easier, as the cold air starts to pierce our engines and lungs.

Wherever you may be, nasty road conditions and winter driving can be dangerous, so it’s always a good idea to plan ahead. Weather.com blogged about how bad-weather car accidents are more deadly in the U.S. than many of the worst storms.

Snow, rain, fog and wet pavement all pose a hazard during the season. To be ahead of the game, here are some preparedness tips:

Garage Time

  • Battery check – Cold temperatures are a battery killer. Be sure you’ve got the juice to keep going. Check the terminals for corrosion that needs cleaning and ensure the alternator and belts are in good shape.
  • Antifreeze and coolant – Look for any radiator and hose leaks and top off the reservoir, if necessary. If it’s been several years since you’ve changed the coolant, be sure to get some fresh fluid in there.
  • Windshield wipers and fluids – Make sure the wipers are working and the blades are not worn. Fill the washer reservoir with a good-quality fluid that doesn’t freeze.
  • Brake system– Being able to stop is crucial when roads are slick. Look to see that the floor mats aren’t blocking the pedal. If you notice braking issues, have the brake fluid, pads, rotors and lines checked.
  • Tire pressure and tread – Tires should be checked monthly for wear and proper inflation regardless of the season. Make sure you have a spare tire, and keep a pressure gauge in the vehicle with you.
  • Fuel and oil level – It’s a good idea to keep your fuel tank at least half-full in case you get stranded on the side of the road and need to stay warm. Motor oil should also be topped off.

Emergency Roadside Kit

  • Flashlight – I like to carry an LED flashlight in my truck since they last a long time. But a traditional flashlight works well and tends to be brighter.
  • Tool kit – It should have the basics, including screwdrivers, pliers, an adjustable wrench and a socket set. Work gloves, tape, fuses and a good pocket knife or multi-tool are all handy to have as well.
  • Blanket – Not only does it keep you warm in winter, but it can also block out wind and help treat shock victims.
  • Jumper cables – It’s best not to settle for chintzy. Good-quality, thick cables with multi-strand wire, heavy duty clips and extra length can save you from headaches. Invest in four-gauge, 20-foot cables that won’t break the bank and will last a long while.
  • Food and water – Keep a stash of high-energy foods such as granola bars and nuts in the car.
  • Fire extinguisher – Often overlooked, but good to have. A multipurpose A-B-C type is the way to go.
  • First-aid kit – Any kit should contain bandages, gauze and prep pads to stop bleeding and prevent infection.
  • Other items to consider – Maps, shovel, broom, ice scraper and flares.

Even if you don’t get any snow, it’s good to be ready for any emergency. Got any more tips to share? Let us know in the comments.

Maintenance, , , , , , ,

Help Revive a Lawn Mower (and other equipment) that Runs Rough

Written by Charleen

Help Revive a Lawn Mower (and other equipment) that Runs Rough

John Baker|

Judging someone’s character can be boiled down to this key question: do they love going to the dump?

An affirmative answer indicates a visionary – one who sees a fashionably distressed dining set where others see a worn out table and chairs. One who sees the south wall of their new chicken coop where others see dusty old windows. One who sees his new (free) rolling shop stool where others see a ratty office chair.

Why drop $50 on a shop stool when you can get a sweet unit like this free at the dump?

So, while I salivate at adding a lawnmower, snowblower or other piece of equipment from the dump to my family fleet, I also burn with shame toward my fellow man for discarding something that might have been easily repaired.

There has to be a better way

One of the biggest reasons people junk their lawnmower, string trimmer, chainsaw or other equipment is because it starts hard and runs rough. A dirty carburetor is often to blame.

Over time, oxygen deteriorates the gasoline in the carb, leading to the formation of varnish and other deposits that stick the float, block the screens and plug the tiny fuel passages. The result? Fuel that doesn’t flow properly and an arm nearly ripped from its socket from fruitlessly yanking the starter cord.

Engine deposits are another problem

The combustion chamber grows intensely hot during operation. The heat breaks down motor oil, creating carbon that can lodge in the ring lands and cause the piston rings to stick. Stuck rings reduce engine compression, which makes starting more difficult and reduces engine power.

Gasoline byproducts can form deposits on the piston crown, which can lead to pre-ignition. That’s when a super-heated chunk of carbon ignites the fuel/air mixture before the spark plug fires, causing a shock wave in the cylinder that can lead to piston damage.

In two-stroke engines, deposits can block the exhaust port or spark arrestor screen, choking off airflow and leading to rough-running. If bad enough, the engine will quit running altogether.

String trimmer exhaust port plugged with carbon deposits, causing it to run poorly.

An effective way to prevent hard-starting, rough-running equipment is to treat gas with gasoline stabilizer prior to storage and to periodically clean the carburetor and combustion chamber with a good fuel additive. Otherwise, you’ll find yourself at the dump paying to dispose of your lawnmower, snowblower or other equipment while people like me lie in wait, rubbing our hands together with glee.

If your engine and carburetor are already dirty and causing grief, clean them with AMSOIL Power Foam. It’s a potent cleaning agent that…

  • Cleans deposits from ethanol and degraded fuel
  • Removes gum and varnish
  • Maximizes horsepower
  • Restores startability
  • Helps improve fuel economy
  • Reduces pollution

It will not damage seals, gaskets, rubber or plastic materials commonly used in gasoline engines.

I’ve tried it a few times on my lawn and garden equipment, and it’s pretty simple to use. Just run the engine to normal operating temperature, remove the air filter and spray Power Foam into the intake as fast as possible without stalling the engine. You may have to rev the engine to facilitate the process. Make sure you’re in a well-ventilated area because an impressive volume of smoke will emit from the exhaust.

Then, shut off the engine and let it sit for 10-15 minutes.

While you’re waiting, Power Foam‘s potent formula attacks and loosens the built-up carbon and varnish, helping free stuck rings, clean the valves and piston crown, and remove varnish from the carburetor. If the engine is especially dirty, you may want to repeat the process.

Replace the air filter, start the engine and pat yourself on the back for helping prevent the addition of one more perfectly usable piece of equipment to the local dump.

It may be unfortunate for scavengers like me, but it’s great for your wallet.

And here’s another Sioux Falls secrete for you lawn care customers!! A frequent weedeater problem easy to repair.

video
play-sharp-fill
Maintenance, , , , , , , ,