Skip to main content

DEEP CLEAN: P.I. GASOLINE ADDITIVE – More Miles Instantly

Written by Charleen

Deep Clean:

P.I. PERFORMANCE IMPROVER GASOLINE ADDITIVE

P.i. Performance Improver Gasoline Additive (API) now features a new label, formula and capless- compatible bottle. The popular deep-cleaning gasoline additive continues to restore your engine’s power and performance and increase fuel economy.

Maximum Fuel Economy

AMSOIL P.i. (Performance Improver)  is a potent gasoline performance improver featuring concentrated detergents that aggressively clean stubborn, power-robbing deposits from injectors, valves and combustion chambers. It reduces emissions and increases fuel economy up to 5.7 percent. P.i. cleans your entire fuel system in one tank of gasoline and restores engine power and performance.

It’s also our best selling non-motor oil product here in the Sioux Falls (Exit 73) store. Also find it at Stan Houston’s

AMSOIL did their research and worked with the additive suppliers to create this product – thus don’t waste your time with other on the shelf “injector cleaner(s)”. If you have that’s great too as you will have something to compare results.

Deposit Clean-up

GDI injectors are located inside the intense heat and pressure environment of the combustion chamber, making them particularly vulnerable to deposits. Even small amounts of deposits can lead to decreased power and fuel economy. P.i. features improved cleaning power to remove stubborn deposits and keep GDI injectors functioning as they should.

Going Capless

Many new vehicles have replaced traditional fuel caps with capless systems. While adding some convenience at the gas pump, the feature can make using fuel additive bottles a challenge. The threads on most bottles are easily hung up and make treating fuel and removing the bottle difficult. The new P.i. bottle is fully compatible with capless fuel systems.

Formulation Change? Yes. The basic P.i. formula and benefits are the same, but we’ve added to them with new chemistry to better target deposits in direct-injection engines.

New Stock Number? No

New Treat Rate? Yes. Treats up to 30 gallons. Add entire bottle to tank at fill-up.

Pricing Change? No

  • Restores power and performance
  • Reduces need for costly higher-octane fuel
  • Reduces noise from carbon rap and pre-ignition
  • Controls pre-ignition “knock”
  • Maintains the engine efficiency, fuel economy and power of new vehicles
  • Capless compatible

Knocking Out Pre-Ignition

Most cars have “knock” sensors that adjust spark timing to prevent knock. Although audible knock is controlled, power is lost from retarded timing. Higher octane fuels can be used to help prevent knock, an effect called “octane requirement increase.” As a vehicle ages, more-expensive, higher-octane fuel is needed to keep it operating at peak performance. By cleaning combustion chamber deposits, knock is controlled, power is restored and costly higher octane fuel is no longer necessary.

Amsoil Product Reports, , , , , , ,

The Cost of Owning a Diesel – This Product is Not an Option

Written by Ches Cain

Diesel Fuel Additives – Not an Option in Diesel Ownership

Years of reviewing the effects of modern diesel fuel, mechanical issues, costs and designs of injectors, pumps, failures keeps the topic of the misunderstood fuel additive fresh in mind.

Impressive In The Field

As an AMSOIL dealer, one product I rank in the top three where overly positive feedback is almost always given at each sale is our Diesel Injector Clean (and lubricant).  Of course many of those sales were started because I suggested to the customer to try our brand over whatever else they were using. And the majority of the time the customer was not using any at all! But the results seem to be instant thus the higher level of feedback.

Diesel Fuel Additives at Stan Houston's

Display at Stan Houston’s on 12th st – Diesel Fuel Additives and synthetic oils.

What To Expect

I could list all the sales info, product points to know, etc. but you can easily find all that in the product listing or technical data sheet (printable PDF). I wanted to state some of the instant feedback and some savings you can expect!

  • Increased mileage beyond any averages AMSOIL claims. I hear 2 to 3 more MPG’s although that’s not advertised.
  • Quieter engine
  • Regens cut in half – That alone is worth it! Unique to AMSOIL’s formula.
  • More power under load – You’ll notice more with the Cetane Boost
  • Solved sluggishness when passing
  • Skip past expected injector failure mileage to next to none
  • RV’s – amazingly easier starts on seldom used engines
  • Longer fuel filter performance
  • Less water buildup in tank

Lubricity

This is the reason it’s not optional. Not AMSOIL but the industry says you need a lubricant added to every tank of fuel.
AMSOIL recently posted about folks using 2-stroke oil in the fuel. They admitted it worked but only offers a fraction of the lubricant needed especially in modern injectors which rely on products with years of development. The results can be in the thousands saved on repair or replacement costs.

A fuel additive supplier who visited at one of our AMSOIL dealer conventions made it clear. He used a 2015 Chevy Durmax diesel for example. He said in 10 year ownership you will ether spend on average $750 on fuel additives or $6000 to $10,000 in injector repair.

Much of the failure is because the fuel or the over the counter additive doesn’t address corrosion within the injector. The wear resulting which is not visible without a microscope can be devastating to your engines efficiency. The injectors these days usually only have 1 to 2 microns of space around them so you cannot afford even the slightest  dirt causing wear or corrosion from a lack of proper additive.

Best way to buy in Sioux Falls

I keep a healthy supply at my shop at Exit 73 and also at Stan Houston’s on W. 12th St.

The best way to buy is get one 16 oz. bottle and the half gallon as the refill. The savings with the half-gallon is like buying four 160-ounce bottles but paying for three. A sight window is on all bottles assisting with the proper dosage.  And the best part is one ounce (1OZ) treats five gallons! It’s a great bargain even at full retail.

Of course you can buy through our website – AMSOIL Diesel Injector Clean Product Code ADF.

We also have 5-gallon sizes for OTR Trucking operations and a small 8 ounce bottle (Case of 6) for passenger car diesels.

 

 

Fuel Additives, , , , , , , , , , ,

Saber Pro to help with Sioux Falls Tornado Clean-up

Written by Ches Cain

We are fully stocked with the best 2-cycle oil on the planet.

This product will help greatly with the clean up after the tornado damage in Sioux Falls. Chain saws NEED Saber. Don’t struggle with other products.

The Saber Pro we have posted several study’s and articles as it’s AMSOIL’s 2nd oldest product and the one that saves you money.

It’s like insurance for your chainsaw whether you have an expensive one or you have to make an old 2nd hand unit last. You can save on spark-plugs, fuel and downtime with our best 2-strike pre-mix ever created.

Saber Pro 2-cycle oil for chain saws in Sioux Falls

I have it in stock here at the AMSOIL store Tea Exit 73 and also at Stan Houston’s.
We did run out of the Bar & Chain oil today but more has been ordered for both locations.

Sioux Falls Oil and Lubricants Blog, , , ,

500,000 Mile Toyota Work Truck

Written by Charleen

Toyota ‘Workhorse’ Clocks More Than 500,000 Miles

Fraser is a satisfied long-term PC who uses AMSOIL lubricants in all of his vehicles and equipment.

Preferred Customer Brock Fraser of Las Vegas counts on his 1998 Toyota Tacoma to keep his business on the road.

“This is a pickup I use primarily for work,” Fraser said. “I own a commercial printing and mailing operation. Frequently, I make runs to Phoenix and Los Angeles (600-mile round-trip runs each) to pick up loads of printed material to bring back to customers in Las Vegas.”

The truck, with its six-cylinder engine, and five-speed tranny, is a workhorse that consistently hauls heavy loads through hilly territory, he said. It had 70,000 miles on the engine when he bought it in late 2005. The odometer recently turned over to 508,000 miles.

Fraser first learned about the qualities of AMSOIL lubricants from a chemist friend. “(He) did a bunch of research and was telling me how highly he thought of AMSOIL,” Fraser said. “That is all it took for me to become a fan. That had to be a good 15 years ago.”

Followed AMSOIL’s published interval recommendation to a T!

Fraser installed AMSOIL Signature Series Motor Oil when he first bought the truck.

“I have always maintained oil change intervals of 25,000 miles with filter changes at 8,300 miles and 16,700 miles using EA15K51 filters,” Fraser said.

Every 100,000 miles he services the transmission and differentials with AMSOIL 80W-90 Synthetic Gear Lube. “The transmission has never been opened up and performs flawlessly,” Fraser said. “This engine has never been opened up. The heads are bolted in place as they came from the factory. The bottom pan has never been removed. She passes smog every year without fail and uses very little oil between changes.”

He is a satisfied Preferred Customer, he said, and now installs AMSOIL products in his lawn mower, his ‘86 Mercedes Benz 560 SL and his 2002 Toyota 4Runner.

Products Fraser Uses

Fraser keeps his truck on the road using the following AMOSIL products:

AMSOIL Signature Series

  • Protects Against Engine Wear
  • Protects Pistons from Low-Speed Pre-Ignition
  • Extends Drains: Protection Guaranteed
EA Filters

  • Absolute Efficiency
  • Less Restriction
  • Contaminant Retention
Synthetic Gear Lube

  • High-load gear and bearing protection
  • Long oil and equipment life
  • Helps reduce maintenance costs
  • Compatible with conventional and synthetic gear lubes
  • Multi-functional for multiple applications – Works in GL4 and GL5 applications
  • Competitive price

Buy Local in Sioux Falls

Find the best lubricants available in Sioux Falls at Stan Houston’s Equipment Company 3020 W 12th St, Sioux Falls, SD 57104

Testimonial, , , , , , , , , ,

Z-ROD® Keeps Classic Vehicles Street-Ready

Written by Ches Cain
Leave a Comment

Vintage Car and Cam Wear Problems Solved – Zinc Fortified Motor Oils

After this long Sioux Falls winter, making the transition from storage to the street can be an anxious time for classic car owners. Even after extensive preparations, doubts may linger whether a prized vehicle has been effectively protected during a period of inactivity. Many owners now look to modern technology to keep vintage hot rods and muscle cars performing at a high level on the street and fully protected during storage.

Protecting engines designed decades ago- and engines modified for increased performance- can be challenging. From flat-tappet cams and splash-lubricated components to the toll of periodic storage, unique issues must be addressed.

Amsoil Z-Rod high Zinc oil

Flat-Tappet Cams and ZDDP

The design of flat-tappet cams makes them especially vulnerable to wear. As the name indicates, the tappet- or lifter – is flat. During operation the surface of the cam lobe slides rapidly over the surface of the tappet, producing high friction and temperatures. The camshaft and lifters are responsible for triggering the precisely tuned movements of the valve train. Here, the use of anti-wear additives becomes crucial.

Stop Cam Wear – No Aftermarket Oil Additives Needed

Zinc dialkyldithiophosphate (ZDDP) is a commonly used motor oil additive that provides anti-wear protection and minimizes lubricant breakdown. ZDDP also exhibits mild extreme-pressure protection. As temperatures in an engine rise, ZDDP decomposes, and the resulting chemistry protects critical metal surfaces.

Without the protective film barrier provided by ZDDP, the cams and lifters wear from the force of operation, negatively affecting cam and valve operation. Because most V-8 engines of the muscle car era came standard with flat-tappet cams, the problem is prevalent to classic-car and hot rod owners.

In these applications, modern oils, such as AMSOIL synthetic motor oils, are capable of providing adequate wear protection after the engine has been broken in. But due to variables like severity of service and level of modification, AMSOIL primarily recommends high-ZDDP oils in these applications, such as Z-ROD® Synthetic Motor Oil. When breaking in a rebuilt or high-performance engine, AMSOIL recommends AMSOIL Break-In Oil, which contains high levels of ZDDP for added protection.

Rust and Corrosion

Moisture can be as devastating an engine contaminant as dirt or sludge. Vehicles subjected to long-term storage are especially vulnerable to humidity-driven rust and corrosion. AMSOIL Z-ROD® Synthetic Motor Oil is formulated with a unique blend of rust and corrosion inhibitors to ensure maximum protection during storage.

AMSOIL Z-ROD® Synthetic Motor Oil (ZRT, ZRF)

  • 10W-30 and 20W-50
  • Protects flat-tappet cams
  • Long-term rust and corrosion protection

AMSOIL Break-In Oil (BRK) SAE 30

  • Quickly seats rings
  • Protects vital parts from wear
  • Increased film strength

Other AMSOIL Motor Oils containing substantial Zinc levels for Gas & Diesel engines

Call about any of these oils by calling us at 800-579-0580

Or visiting the Sioux Falls store at 47073 98th St. Also find AMSOIL at Stan Houston’s on 12th St!!

Sioux Falls Motor Oil and Lube News, , , , , , , ,