Skip to main content

Racing Oil vs. Regular Oil: What’s the Difference?

Why not use Racing Oil in my Car If It’s Tougher?

When deciding if racing oil is right for their vehicles, gearheads and other enthusiasts sometimes offer this line of reasoning:

  1. Racing engines are more severe than my engine
  2. Racing engines use racing oil
  3. Therefore, I should use racing oil in my vehicle for best protection

It’s true that your average racing engine creates operating conditions more severe than the average passenger car engine.

However, that’s not to say that modern engines aren’t tough on oil.

The turbocharged, direct-injection engines in modern vehicles generate increased heat and contaminants compared to their predecessors. Motor oil bears the brunt of the added stress.

That’s why industry motor-oil specifications keep growing tougher and automakers are increasingly recommending synthetic oils to meet these strict performance specs.

Scott Douglas AMSOIL racing truck

Scott Douglas AMSOIL race truck

Should I use racing oil in my car?

Racing, however, is a whole different animal.

The powerful, modified engines in racing vehicles produce extreme heat and pressures your average car or truck simply will never see.

A 900-hp Pro 4×4 race truck can produce engine temperatures in excess of 300ºF (149ºC). Engine temperatures in a typical passenger car/light truck fall somewhere between 195ºF and 220ºF (90ºC – 104ºC).

The difference is even more striking when you consider that the rate of motor oil oxidation (chemical breakdown) doubles for every 18ºF (10ºC) increase in oil temperature.

The tremendous shearing forces the oil bears as it’s squeezed between the interfaces of the pistons/rings and cam lobes/lifters pose another problem. The pressure can tear apart the molecular structure of the oil, reducing its viscosity and film strength.

Racing oil has to be formulated differently to protect these demanding engines. Even so, it doesn’t mean you should order a case of AMSOIL DOMINATOR®  10w-30 Synthetic Racing Oil for your car.

DOMINATOR® 15W-50 Racing Oil

Racing oil is changed more often

So, why not use racing oil in your daily driver? For starters, racing oils are changed frequently.

Most professionals change oil every couple races, if not more frequently. For that reason, racing oils are formulated with a lower total base number (TBN) than passenger car motor oils.

TBN is a measure of the oil’s detergency properties and its ability to neutralize acidic byproducts. Oils with longer drain intervals have higher TBNs.

AMSOIL Signature Series Synthetic Motor Oil features a TBN of 12.5 to enable its 25,000-mile/one-year drain interval.

In contrast, DOMINATOR Synthetic Racing Oil has a TBN of 8 since we recommend changing it more often. As great as it performs on the track, DOMINATOR is not what you want in your engine when you’re driving thousands of miles and several months between oil changes.

Regular motor oil is designed to provide additional benefits

You also want to use an oil in your daily driver that excels in several performance areas:

Motor oil additives produce many of these benefits. For example, anti-oxidant additives fight increased heat and extend oil service life.

Anti-wear additives interact with the metal surfaces of engine parts and guard against metal-to-metal contact.

Many additives form layers on metal surfaces. That being the case, they compete with each other for space, so to speak, like pigs competing for room at the trough.

Racing oils are often formulated with a heavy dose of friction modifiers to add lubricity for maximum horsepower and torque.

The boosted level of additives meant to increase protection and performance during a race doesn’t leave room in the formulation for additives found in passenger car motor oils that help maximize fuel economy, fight corrosion or improve cold-weather protection.

In effect, the ravenous pigs at the trough leave no room for their brethren, resulting in a less well-rounded formulation.

Bottom line: use regular motor oil in your daily driver

Achieving the tasks of a passenger car motor oil requires a finely balanced formulation. Too much or too little performance in one area can negatively affect other areas – and the oil’s overall protection and performance. The list of tasks required of a racing oil, however, is much shorter.

The right tool for the right job is an axiom with which you’re familiar. The same holds for motor oil. It’s best to leave racing oil to competition engines and use a properly formulated passenger car motor oil for your daily vehicle.

Five reasons to use motorcycle oil in your bike

You can use Car Motor Oils in your Bike if you Add Two More Wheels.

You wouldn’t want to buy a used bike if motorcycle oil wasn’t used.

Impressive performance happens when you are using the right oil in the right application.

Len Groom | TECHNICAL PRODUCT MANAGER, POWERSPORTS

The results of a study from lubricant additive manufacturer Infineum caught my eye recently. A survey of 1,000 bikers revealed that fewer than 60 percent are using a motorcycle specific oil in their motorcycles. Interestingly, more than three quarters of respondents think they’re using a motorcycle oil. Clearly there’s confusion in the market that requires clarification.

Let’s start with why you should always use motorcycle oil in a motorcycle engine. I’ll boil it down to five key reasons.

1) Motorcycles run hotter

In general, automotive engines are water-cooled. A typical automotive engine can reach 235ºF (113ºC) during operation, which is plenty hot. Motorcycles, however, run even hotter, particularly big, air-cooled V-twins, like your average Harley Davidson. They rely on air flowing across the engine for cooling, which is inherently less efficient at dissipating heat. This configuration poses additional challenges in stop-and-go traffic when there’s little airflow, particularly on hot summer days. In fact, testing of a 2012 Harley Street Bob in our mechanical lab demonstrated an average cylinder head temp of 383ºF (195ºC).

Heat that intense causes some oils to thin and lose viscosity, which reduces wear protection. High heat also hastens chemical breakdown of the oil (called oxidation), which requires you to change oil more often. In extreme cases, the bike’s temperature sensors can shut down the engine if it gets too hot.

2) High rpm destroys lesser oils

Motorcycles tend to operate at engine speeds significantly higher than automobiles. Your average metric sport bike easily eclipses 10,000 rpm. Some have even pushed 20,000 rpm. Your car or truck’s redline doesn’t even come close. The hydrocarbon chains get ripped to shreds.. You can feel the after-effects through the peg and handle bars.

High rpm places additional stress on engine components, increasing the need for wear protection. It subjects oils to higher loading and shear forces, which can rupture the lubricant film and reduce viscosity, both of which increase wear. High rpm also increases the likelihood of foaming, which can reduce an oil’s load carrying ability, further inviting wear.

3) Increased power density = increased stress

Motorcycle engines produce more horsepower per cubic inch than automobiles. They also tend to operate with higher compression ratios. Increased power density and compression lead to higher engine temperatures and increased stress. This places greater demands on motorcycle oil to fight wear, deposits and chemical breakdown.

4) Must also protect transmission – prevent viscosity loss

Many motorcycles have a common sump supplying oil to both the engine and transmission. In such cases, the oil is required to meet the needs of both the engine and the transmission gears. Transmission gears can shear the oil as it’s squeezed between gear teeth repeatedly at elevated rpm, causing some oils to lose viscosity. Many motorcycles also incorporate a wet clutch within the transmission that uses the same oil. Motorcycle wet clutches require a properly formulated lubricant that meets JASO MA or MA2 frictional requirements.

5) Storage invites corrosion

Whereas automobiles are used almost every day, motorcycle use is usually periodic and, in many cases, seasonal. These extended periods of inactivity place additional stress on motorcycle oils. In these circumstances, rust and acid corrosion protection are of critical concern.

While a good passenger car motor oil (PCMO) hits many of these performance areas, it doesn’t get them all.

PCMOs usually contain friction modifiers to help boost fuel economy. Furthermore, PCMOs don’t meet JASO MA or MA2 requirements. If used in a motorcycle, they can interfere with clutch operation and cause slippage. And no rider wants to deal with a slipping clutch. Likewise, motor oils have no natural rust or corrosion resistance. Instead, corrosion inhibitors must be added to the formulation, and typical motor oils don’t contain them.

AMSOIL Synthetic Motorcycle Oil is designed for the unique demands of motorcycles. It’s formulated without friction modifiers for precise, smooth shifts. It also contains a heavy dose of corrosion inhibitors to protect your engine against rust during storage. And it’s designed to resist viscosity loss due to shear despite intense heat and the mechanical action of gears and chains.

Ensure your customers are using AMSOIL synthetic motorcycle oil in their bikes for the best protection this riding season.

And people who use car oil in their bikes probably use the term “drive” when referring to riding.